UTC to PST Converter: UTC to Pacific Time

UTC is UTC+0, all year, with no daylight saving time. Pacific Time is PST (UTC−8) in standard time and PDT (UTC−7) during daylight saving time. DateMath reads both clocks for the date you pick, so the answer always uses the names and offsets in force that day.

Because only one of the zones changes its clocks, the difference changes during the year. A converter or a rule of thumb with one fixed number is wrong for part of the year; the table below gives the dates for 2027.

Every hour of the day in UTC, read in Pacific Time. The two columns are January 15, 2027 and July 15, 2027, standard and daylight saving time.

GMT reads the same clock time as UTC, so GMT to PST is the same conversion. UK time differs in summer, when London is on BST, UTC+1.

Turn the difference around: Pacific Time to UTC on each date uses the same gap in the other direction. Press Swap in the converter above to switch the two zones.

With both sides working 9 to 5, the shared hours are none in winter and 4:00 PM to 5:00 PM UTC in UTC, 9:00 AM to 10:00 AM PDT in Los Angeles in summer. To add more people or other working hours, use the meeting planner. For an event set at a time in Pacific Time, convert it here, then count down to it with the day countdown.

DateMath turns the date and time you enter into one moment on the from zone's clock, then reads that moment on every other zone's clock, with each zone's UTC offset for that exact date from the IANA time zone database in your browser. So the difference between two zones is worked out for the date you pick, never taken from a fixed table: Pacific Time is 3 hours behind Eastern Time all year, but UTC is 8 hours ahead of Pacific Time in winter and 7 in summer.

• The IANA time zone database. DateMath's time zone tools take each zone's UTC offset and daylight saving dates from the IANA time zone database (tz) built into your browser, the data computers and phones set their clocks by, so every date gets the rule in force on it. US daylight saving time runs from 2:00 AM on the second Sunday in March to 2:00 AM on the first Sunday in November (15 U.S.C. 260a); the EU and the UK change at 1:00 AM UTC on the last Sundays of March and October. Source: IANA time zones, 15 U.S.C. 260a, Directive 2000/84/EC.
• The Gregorian calendar. DateMath treats every date as a Gregorian date, with its leap-year rule: a year divisible by 4 is a leap year, except century years not divisible by 400, so 2000 had a February 29 and 2100 will not. Source: Gregorian calendar.

DateMath's date math is tested against more than 100 cases worked out by hand. Every worked example and table on the site is computed with the same code the calculators run, so a page and its calculator can't disagree.